How Much Oil for a Masterbuilt Turkey Fryer?

Mastering the Art of Deep-Frying Your Thanksgiving Feast

Deep-frying a turkey is a beloved Thanksgiving tradition, offering a crispy and flavorful alternative to roasted turkey. However, the process can be daunting, especially when it comes to determining the correct amount of oil for your Masterbuilt turkey fryer. This article delves into the oil requirements for Masterbuilt fryers, providing insights to help you achieve a delicious and safe frying experience.

Recommended Oil Quantity:

For Masterbuilt turkey fryers, the recommended amount of oil is 2.75 to 3.5 gallons. This quantity is specifically designed for the Masterbuilt brand and should be adequate for frying a turkey up to 14 pounds. Exceeding this amount can lead to spills, overflows, and potential safety hazards.

Factors Influencing Oil Quantity:

While the recommended oil quantity provides a general guideline, several factors can influence the exact amount you need:

  • Turkey Size: Larger turkeys require more oil to ensure complete submersion during the frying process.
  • Fryer Model: Different Masterbuilt fryer models may have varying oil capacities.
  • Desired Oil Level: Some individuals prefer a higher oil level for added safety and heat distribution.

Adjusting Oil Quantity:

If you are frying a smaller turkey, you can use less oil. However, ensure that the oil level is still sufficient to fully submerge the turkey without it touching the sides or the heating element. Conversely, exceeding the recommended oil quantity is not advisable due to the potential for spills and safety concerns.

Measuring Oil Quantity:

One effective method for measuring the correct amount of oil is to place the turkey in an empty fryer pot and fill it with water until the turkey is fully submerged. Remove the turkey and mark the waterline. Empty the pot, dry it thoroughly, and then fill it with oil to the same marked line.

Oil Type and Reuse:

It is recommended to use oils with high smoke points, such as peanut, canola, or vegetable oil. These oils are less likely to break down or catch fire at the high temperatures required for deep-frying. You can reuse the oil for subsequent frying sessions. Allow it to cool completely, strain it through a fine-mesh sieve or cheesecloth to remove any food particles, and store it in a cool, dark place. However, monitor the oil’s condition and discard it if it becomes dark, smells rancid, or develops an off taste.

Following the guidelines provided in this article, you can determine the correct amount of oil for your Masterbuilt turkey fryer and ensure a successful and safe deep-frying experience. Remember to prioritize safety, use the recommended oil quantity, and always monitor the oil’s condition for optimal results. Happy frying!


The information provided in this article is for general knowledge and informational purposes only, and does not constitute professional advice. It is essential to consult with a qualified professional for any specific questions or concerns you may have.



How much oil do I put in my Masterbuilt turkey fryer?

The fryer will require approximately 2.75 gallons (11qts) of oil max. The MAX fill line is the maxi- mum amount of liquid that can safely be used in this unit. Filling to the line is more than enough water or oil to prepare most food (see pg. 8 in your instruc�on manual).

How much oil do you need for a turkey fryer?

You’ll need enough oil to cover your entire turkey, but not so much that it spills over. A general guideline is to use 3 gallons of oil for a 30 qt. pot and 3 1/3 gallons of oil for a 32 qt.

How to cook turkey in masterbuilt deep fryer?

Before you place the turkey in the basket, spray basket with nonstick spray. Wait for the green light to light up on the fryer. Put on protective gloves and lower the turkey into the fryer slowly. Cook for 4 minutes per pound and set the timer on the side of the fryer accordingly.

How much oil does a Masterbuilt turkey fryer use?

The Masterbuilt turkey fryer oil capacity is between 2-3 gallons of oil depending on which turkey fryer you have. While peanut oil is recommended, canola oil can also be used. The fryer has a maximum fill line for the oil and it is very important not to overfill. What Temperature Do You Fry A Turkey In A Masterbuilt Fryer?

Can you fry a Turkey in a Masterbuilt Fryer?

It is recommended to use oils with a high smoke point for frying a turkey in a Masterbuilt fryer. Some suitable options include peanut oil, canola oil, and vegetable oil. These oils have high smoke points, which means they can withstand the high temperatures required for frying without breaking down and producing unpleasant flavors.

How much oil do you need to fry a Turkey?

The amount of oil required will depend on the size of your turkey and the size of your fryer. As a general guideline, for a 12- to 14-pound turkey, you will need approximately 3 to 4 gallons of oil. It is important to refer to your fryer’s instructions to determine the precise amount for your specific model.

How many LBS can a Masterbuilt deep fryer Fry?

The Masterbuilt 3-in-1 Deep Fryer makes it easy to get a fried turkey without all the mess and stress. *As a note, for the 10-liter fryer, you can fry up to a 20-pound turkey and for the 8-liter fryer, you can fry up to a 12-pound turkey. Here’s a guide for how to use it.

Leave a Comment